16
16
16
16
1 Important notes
EN Floor grinding machine DSM 530S / DSM 650S / DSM 800S
The manufacturer and owner of the machine must
respect the contents and regulations of the EC
directi- ves. The effectiveness of any measure
ultimately de- pends on how well all parties, i.e. the
manufacturer,
the owner and the machine operators, work
together to uphold safety standards.
All laws and regulations (e.g. the valid regula-
tions on waste disposal), accident prevention
guidelines and generally recognised safety rules
must be complied with when working on and with
the machine.
2.2 Safety instructions
This machine incorporates the very latest
technologi- cal innovations and has been built in
accordance with recognized safety regulations. This
ensures that the highest possible standards of
occupational safety are maintained. However,
incorrect use of the machine could endanger the
health and lives of the personnel or cause material
damage.
The machine may only be operated by peo-
ple who have been assigned to do so and
who have the appropriate training and skills.
If any defects are found in the machine that
could endanger people or damage property,
stop the machine immediately and ensure
that it cannot be used again until all repairs
are completed.
The operating and maintenance personnel
responsible for the machine must ensure that
no one can enter the machine’s danger zone
during operation or maintenance work.
Risk of injury if safety devices have been
removed or are non-functional! The safety
fixtures must be checked for completeness
and function before starting up.
The safety fixtures must be mounted during
operation.
The surfaces to be processed by the ma-
chine need to be free of obstacles.
Risk of injury from rotating machine parts!
Limbs and clothing can be drawn in.
Proceed with the greatest care and caution!
When working on the machine (set--up, main-
tenance, service, repair, cleaning, etc.), the
power supply of the machine has to be di-
sconnected from the mains
(disconnect power plug)
!
High--voltage electrical current can be fatal!
Only connect the machine to power supplies
equipped with a ground fault circuit breaker!
Connections with power lines
need to be protected from splash water!
Only suitably knowledgeable, qualified pro-
fessional electricians are permitted to per-
form work on any electrical parts of the sy-
stem.
Risk of poisoning due to harmful substan-
ces at the workplace!
Eating, drinking or smoking at the work-
place is prohibited! Always eat in break
rooms or canteen areas!
After completing the work, thoroughly clean
yourself!
A general inspection of the machine must be
conducted before starting up the machine.
Particular attention should be paid to dama-
ged or loose components, and wear.
The machine may only be put into operation
in perfect technical condition.
Adding to or modifying the machine in any
way that could compromise operating safety
is prohibited!
Cleaning and maintenance may be done
only by trained personnel.
