›
Step 2: Remove the battery compartment out of the
ApeRemote.
›
Step 3: Slide the battery compartment back into the
remote while pushing the “flashlight” symbol. (Remote
will be flashing red on groups 1 & 4).
›
Step 4: Push the “Bright” button on the remote.
›
Step 5: Press the power button on fixture one time.
›
Step 6: Press the “Power” button on the remote.
Pairing
Ape Labs lights and ApeRemotes can be paired permanently
to one another so that they will no longer synchronize with
other fixtures. Pair as many lights to one remote as you
would like. This will allow users to create up to four groups
on one remote and up to four more groups on each
additional remote that is being used at the same time.
Pairing an ApeRemote with a Fixture:
›
Step 1: Remove battery from ApeRemote
›
Step 2: While holding down flashlight button, insert
battery into ApeRemote (if done correctly, group 1 and
group 4 will flash on remote).
›
Step 3: Turn on fixture with long press on power button
(5 seconds – if done correctly, fixture will blink blue).
