APCO Aviation Play 42 MK-II, Руководство пользователя

Страница: 6 / 24

www.apcoaviation.com
4 HIT VALVES (H igh speed I n- T ake )
The Play 42 is equipped with an Active HIT Valve system (patent pending) to
improve the overall performance and safety of the wing especially during accelerated
flight.
The valve system allows maximum inflow of air when the glider acquires a lower
angle of attack while accelerated. HIT valves open and close in flight to increase the
internal pressure of the glider.
For the valves to work properly it is important to keep them wrinkle free especially in
sub zero temperatures. Make sure the valves are lying flat and are in the closed
position when you fold the glider. Before launch the pilot should check all the valves
and verify that they are flat and cover the entire area of the mesh opening. Creased
and wrinkled valves will not adversely affect the safety of the wing.
5 BUTT HOLES (Velcro closure on trailing edge tip)
In order to empty sand and small stones from the glider simply shake out the debris
towards the wing tip and open the
Butt holes ( Velcro closure on trailing edge tip)
and pull out the cloth tongue outside to empty. Do not forget to close the Butt holes
afterwards.
Page 6 of 24