APB DynaSonics
34
© 2006 APB DynaSonics – All Rights Reserved
SYSTEM METERING
Aux Meters (X10)
A full time output meter is provided for each of the 10 auxiliary outputs. These are multi-segmented LEDs
and display the actual output levels of the Aux Outputs of the console. (These ARE affected by mute switches
or any other activity that may interrupt the output signals).
Note: These meters have a VU-style response and are not peak-reading. Average console levels will show up
on the meters at or around the “0” mark.
Matrix Meters (X4) + Solo Metering
An output meter is provided for each of the 4 Matrix outputs. These are multi-segmented and display the
actual output levels of the Matrix Outputs of the console.
Note: These meters have a VU-style response and are not peak-reading. Average console levels will show up
on the meters at or around the “0” mark.
When a Solo switch is activated on the console, a Red LED below the Matrix 1 meter will illuminate to
indicate that these meters are now displaying the solo’d signals. The PFL or AFL signals are then routed to
the last three of these meters (with the first matrix meter deactivated) to display solo levels as mono, stereo,
or Left-Center-Right. The levels displayed by the solo system are not affected by the solo trim control nor are
they associated with any controls within the monitor or headphone section of the console.
Left - Right - Center – Mono Meters
Full time output metering is provided for Left, Right, Center and Mono outputs. These are multi-segmented
LED’s and display the actual output levels of the Main Outputs of the console. (These ARE affected by mute
switches or any other activity that may interrupt the output signals).
Note: These meters have a VU-style response and are not peak-reading. Average console levels will show up
on the meters at or around the “0” mark.
