APART SDQ5Pir, Инструкция по эксплуатации

Страница: 9 / 20

Instruction manual SDQ5PIR
7
7.
3, 5 mm stereo jack input A: connect your
unbalanced line level signals here.
8.
Balanced line inputs B: connect your
balanced line level signals here.
9.
Speaker output: connect the right speaker
(slave) here. Mind the polarity!!! C
to + and – to -.
10.
Mode switch: this switch turns your
SDQ5PIR in a full stereo or a very compact
mono system. When switched to mono
mode, use the “Left” input only. The audio
signal from the left input will sound through
both speakers.
11.
Mains socket: connect the supplied mains
cord here. This socket contains a 1 A slow
acting fuse. Use a screw driver to flip out
the fuse compartment to access a broken
fuse. When this fuse blows frequently you
should return the SDQ to your dealer for
service.
12.
Heat sink: the heat sink will warm up during
operation! This is normal.
13.
Wall panel connector: standard RJ45
connector for connection of an optional
wall control panel: ACP, ACPL or ACPR. This
connection is NOT COMPATIBLE with other
networks, such as computer networks etc.
Do not attempt to connect anything but the
optional SDQ5PIR wall control panels.
6
11
9
8
7
10