APART SDQ5Pir, Инструкция по эксплуатации

Страница: 13 / 20

Instruction manual SDQ5PIR
11
With ECHO on and LF off, this will be returned by SDQ5PIR:
“
GET SDQLVL<CR> ” (command)
“
SDQLVL -16<CR>
” (reply)
In case both ECHO and LF are on, it will be like this:
“
GET SDQLVL<CR><LF> ”
“
SDQLVL -16<CR><LF>
”
BS is Back Space. This is also an ASCII character. In case BS and
ECHO is on, SDQ5PIR will reply
<BS><SP><BS> each time when
a <BS> is received. <SP> is the space character. This setting is only
intended to have a “nice” text when used with programs like
Hyperterminal.
VALFB means value feedback. Possible values are on or off. When
value feedback in on, the SDQ5PIR will reply its setting after a value
has been changed, such as
SDQLVL .
Control settings:
BACKCT : set the controls at the back of the unit on or off. NOTE:
when set to off, you can NOT operate the unit from the back panel
controls!
WALLCT : set the control of the optional wall control panel on or off.
IRRMCT : set the control by infrared remote on or off.
AUTOPW : set the time for the sleep function. When no audio
signals are detected, the speaker will go to sleep mode after the
AUTOPW time has elapsed. When set to 0, the AUTOPW function
in not active. Values between 0 and 30 can be specified. 0 =
inactive, 1 = auto power off after 1 minute etc... Default value is 15
minutes.