APART PMR4000R, Руководство пользователя

Страница: 7 / 20

INFO@APART-AUDIO.COM
7
Plug in the power cable and connect it to a power receptacle 230V/50-60Hz.
Now turn on the unit and wait until the system has started up. This will take only a
few seconds.
Now the unit will start with the setup wizard. Choose “YES” shown in the display by
turning the rotary selector, highlight “Yes” and push the rotary selector to confirm
your selection.
Select the date time format: 12 hr or 24 hr time display, push to select, confirm
and proceed.
Auto update function: select “update from network” or “no update” and push to
select and proceed.
Set your timezone, daylight saving time option and WLAN region.
Now the unit will start to scan for wireless networks. When a network is found,
follow the on-screen instructions to finish the setup wizard. When no wireless
networks are available, select “wired” and proceed until the setup wizard has
finished. Detailed information on network settings will be explained below.
After finishing the setup wizard, select a module via the push buttons or via the
menu: FM radio, internet radio, USB or UPnP.
Power supply:
Information on handling batteries/rechargeable
batteries
Please adhere to the following information when
handling batteries and rechargeable batteries:
• Keep batteries out of children’s reach.
• Batteries are hazardous waste and do not belong in
household waste.
• Ensure correct polarity when inserting batteries.
• Always remove batteries when the remote control is
not in use for longer periods of time.