APART PMR4000R, Руководство пользователя

Страница: 13 / 20

INFO@APART-AUDIO.COM
13
Network profile:
Internet radio:
• DHCP enable: activates use and switches on the automatic reception of network
data.
• DHCP disable: deactivates use and carries on with the manual entry of network
data.
• IP settings: set the IP address and the subnet mask.
• Gateway address: set the gateway address.
• DNS: set the primary and secondary DNS address.
• SSID: set the wireless network identification.
• Authentication: set the preferred method of authentication: Open, Pre-shared
key (PSK), Wifi protected access (WPA) or WPA2.
• Encryption type: select the appropriate encryption type: Disabled (off) or
WEP (Wired equivalent Privacy) for open or PSK. TKIP (Temporal Key Integrity
Protocol) or AES (Advanced Encryption Standard).
• Key: now enter the code for the wireless network.
Entering names is done via the rotary control: highlight a character and press the
rotary control to enter the highlighted character.
• Select “BKSP” to delete the last character selected.
• Select “CANCEL” to cancel your input.
• Select “OK” to confirm and store the characters you entered.
If for any reason you want to delete a previously used network profile, enter the
main menu/system settings/network/network profile and selected the network
profile you want to delete. Press the rotary control to confirm the selection. The
network profile will be deleted.
The internet radio allows you to listen to numerous internet radio stations
worldwide. Broadband internet access and a wired or wireless network connection
are necessary to use this feature.
You can store presets for easy access without the need to go through all possible
selection parameters. The last selected radio station will be maintained when
powering off the unit. A list of recently selected radio stations is also stored for easy
access to previously accessed stations.
Storing a radio station to memory:
10 memory presets are available for storing. Tune to an internet radio station.
Press and hold a numeric key 1 to 10 on the handheld remote until “Preset stored”