APART PM1122, Инструкция по эксплуатации

Страница: 9 / 24

Instruction manual PM1122
9
6. Mic/line 1 to 4 level: use this knob to adjust the mic 1 to 4 level.
7. S/C led: signal/clip led: the led lights up green when the mic
signal is suffi ciently strong, and becomes red if the mic preamp
is clipping. Turn the preset input trimmer of the corresponding
input down at the back of the unit when the led becomes red.
The red clip leds monitor the input circuit at all times, even
when the level on the front panel is turned to the zero position.
8. Zone assign dipswitches: activate the dipswitches to assign mic/
line input 1 to 4 to zone 1 and/or zone 2 output. Dipswitch
down = input assigned.
9. Tone control mic/line 5 + link: turn the knob to darken the tone
(turn to the left) or to brighten the tone (turn to the right).
10. Mic/line 5 + link level: use this knob to adjust the mic/line 5
level and/or the link input.
11. S/C led: signal/clip led: the led lights up green when the mic/
line signal is suffi ciently strong, and becomes red if the mic
preamp is clipping. Turn the preset input trimmer of the
corresponding input down at the back of the unit when the led
becomes red. The red clip leds monitor the input circuit at all
times, even when the level on the front panel is turned to the
zero position.
12. Zone assign dipswitches: activate the dipswitches to assign mic/
line input 5 or the link input to zone 1 and/or zone 2 output.
Dipswitch down = input assigned.
13. Zone 1 bass tone control: effective on music signals only.
14. Zone 1 treble tone control: effective on music signals only.