APART DIMIC1, Инструкция по эксплуатации

Страница: 15 / 20

Instruction manual DIMIC1/12(S)
15
Attention!
can also program the unit, so that the selected zone LEDs stay
lit after paging. Consult the manual of the master unit for more
details.
By using automated addressing, the master unit will recognize
the microphone/slave, and will automatically recall the settings
and functions of the push buttons after power up. When a new
microphone is added to the system, you must configure the newly
added microphone via the user interface of the main unit.
Do not connect a slave unit to the microphone unit when powered
on. The slave unit will not be recognized and will not function when
hot plugged!!!
When a communication error occurs between microphone and
master unit, or between microphone and slave unit, the LEDs of the
microphone/slave will start to scroll continuously from bottom to
top, left and right simultaneously, to indicate that communication
has failed. Check all connections as well as the cycle power of the
main unit and microphone/slave to restore normal functionality.
DIMIC1/12(S) cannot function unless properly connected to a
compatible master unit!
Do not connect the microphone to a computer or other network.
This will cause malfunctions and may cause damage to your
network and/or microphone. You must connect the microphone to
the master unit via the CAT5 cable.