Revision 1.0
10/2017
Document No. D133-011
Page
1
of
2
HTC Gateway
Quick Start Guide
A-HRIO
REQUIRED SOFTWARE
The HTC Gateway requires Aparian Slate software to setup and configure. The
software installation can be found at
www.aparian.com/software/slate
.
MODULE INSTALLATION
The HTC Gateway requires input power of
18-28Vdc
. The wiring of the power
connector can be found in the wiring diagram below. The HTC Gateway communicates
on both Ethernet and Hitachi RIOH and ROW. The wiring of the Hitachi connector can
be found in the wiring diagram below. The Ethernet connector should be wired
according to industry standards which can be found in the additional information
section.
