Revision 1.0
12/2018
Document No. D124-011
Page
2
of
2
must be enabled.
The CANopen node address of the module is set using the Slate
configuration software.
NETWORK SETUP
The CANopen Router will have DHCP enabled as factory default. This the user must use
a DHCP server to assign an Ethernet network address to the module. Refer to the
additional information section for DHCP servers. Once the module has been assigned
an Ethernet address the user can configure the module with Aparian Slate.
ADDITIONAL INFORMATION
The following resources contain additional information that can assist the user with
the module installation and operation.
Resource
Link
Slate Installation
www.aparian.com/software/slate
CANopen Router User Manual
CANopen Router Datasheet
Example Code & UDTs
http://www.aparian.com/products/canopenrouter
Ethernet wiring standard
www.cisco.com/c/en/us/td/docs/video/cds/cde/cde
205_220_420/installation/guide/cde205_220_420_h
ig/Connectors.html
CANopen Standards
https://www.can-cia.org/canopen/
SUPPORT
Technical support will be provided via the Web (in the form of user manuals, FAQ,
datasheets etc.) to assist with installation, operation, and diagnostics.
For additional support the user can use either of the following:
Contact Us web link
www.aparian.com/contact-us
Support email
