11
Value for the lower
display
relative humidity
(%RH)
(1)
sensor's
temperature
(°C)
or
time
(hh:mm)
for AR232.B
maximum humidity
(% RH)
(1)
minimum humidity
(% RH)
(1)
average humidity
(% RH)
(1)
dew point / frost temperature
(° C / ° F
)
(1)
sensor temperature
(°C/°F)
maximum sensor temperature
(°C/°F)
minimum sensor temperature
(°C/°F)
average sensor temperature
(°C/°F)
alternately humidity
(%RH)
and sensor
temperature
(°C/°F)
(1)
time
(hh: mm)
Resolution of humidity
indications
(1)
1
%RH or g/m3
selection of the display resolution of humidity and/or
temperature on the LCD display and in the ARSOFT-CFG
program (recording in the archive file always takes place at a
resolution of 0.1)
0.1
% RH
0.1
% H or g/m3
Resolution of
temperature
indications
1
(°C/°F)
0.1
°C
0.1
(°C/°F)
Temperature scale type
Celsius (°C)
selection of the scale for temperature (also applies to
recording in the archive file)
Celsius (°C)
Fahrenheit (°F)
Offset for the humidity
(1)
-5.0
÷
5.0
(%RH)
zero calibration for the measured relative humidity and
temperature of the sensor (also applies to the recording in
the archive file)
0.0 %RH
Offset for the sensor's
temperature
-5.0
÷
5.0
(°C/°F)
0.0 °C
Notes: (1)
- the parameter or value does not appear in AR232.B
9.4. BUTTONS' FUNCTIONS AND ACCESS OPTIONS
Table 9.4.
Configuration parameters regarding button functions and access options
Parameter
Range of parameter variability and description
Default
settings
F button function
display date
(dd.mm)
and time
(hh:mm)
display date
(dd.mm) and
time (hh:mm)
display the memory status (the way of recording, the amount occupied memory
and how long it will be enough for)
(1)
display statistics of measurements
(maximum, minimum, average)
,
%RH
(6)
,°C/°F
(2)
display absolute humidity and dew/frost
point
,
g/m3, °C or °F and
(6)
display relative humidity and sensor's temperature
,
%RH, °C/°F
(6)
START/STOP button lock
(indicated by the message
bLoc on
/
off
)
clear the alarm memory
(indicated by the message
ALAr cLEA
, chapter 9.5)
Bluetooth turn on/off
(with the message
bLE 8888
/
oFF
, chapters 9.4.1 and 11)
START/STOP button
function
(always with memory
status display
(1)
)
measurement refresh only
measurement
refresh only
start/stop of recording
(continuous/disabled),
signalling with LCD icon
[
]
or lack
(4)
pause/resume of recording
, indicated by icons
[
] +
(pause) or
[
]
pause/resume of measurements and recording
(HOLD function)
(3)
,
[
] +
/
[
]
Measurement statistics
and alarm clearing by
the START button
disabled
deleted only with pressing
F
+
START/STOP
after hold time 4-9s
(5)
enabled
enabled
additionally deleted with pressing
F
+
START/STOP
after holding time
4-9s
(5)
!
!
