VD-CONV
USER MANUAL
VGA to DVI
Video Converter
Troubleshooting Q & A
Text or lines flicker:
Adjust the ‘Sharpness’ setting.
Image is not aligned on the monitor:
Adjust the
horizontal or vertical adjustments.
No image present on monitor:
Verify the VGA in-
put signal is compatible with the signals listed in the
‘Supported VGA Modes’ table.
© 2017 APANTAC LLC, All rights reserved
7470 SW BRIDGEPORT ROAD
PORTLAND, OR 97224, USA
PHONE +1 503 968 3000
FAX +1 503 389 7921
The content of this document is provided in connection with
Apantac LLC (“Apantac”) products. Apantac makes no repre-
sentation or warranties with respect to the accuracy or com-
pleteness of the contents of this publication and reserves the
right to make changes to specifications and product descrip-
tions at any time without notice.
Features
VGA to DVI video conversion
Supports common VGA resolutions
Horizontal, Vertical, and Sharpness adjust-
ments
Specifications
Model
VD-CONV
Inputs
1 x VGA (DB15)
Outputs
1 x DVI (DVI-I style connector)
Power
9 VDC, 1000mA (AC Adapter)
Dimensions
128 x 75 x 29 ( WxDxH mm )
Supported VGA Modes
Analog
Resolution
Frequency (Hz)
VGA
640 x 480
60 / 72 / 75 / 85
VGA
720 x 400
70 / 85
SVGA
800 x 600
56 / 60 / 72 / 75 / 85
WVGA
848 x 480
60
XGA
1024 x 768
60 / 70 / 75 / 85
SXGA
1152 x 864
75
SXGA
1280 x 768
60RB / 75 / 85
WXGA
1280 x 800
60
SXGA
1280 x 960
60 /85
SXGA
1280 x 1024
60 / 75 /85
WXGA
1360 x 768
60
SXGA+
1400 x 1050
60RB / 75
WXGA+
1440 x 900
60
SXGA+
1440 x 1050
60
UXGA
1600 x 1200
60
WSXGA+
1680 x 1050
60
WUXGA
1920 x 1080
60
WUXGA
1920 x 1200
60RB
