Apantac OG-US-4000 Series, Руководство пользователя, Страница: 13 / 18

APANTAC LLC www.apantac.com 11
OG-US-4000 User Manual
Display Tab:
Extended Display ID (EDID):
The HDMI video input port of the US-4000 includes a programmable EDID. DVI and HDMI sources will read this
EDID and detect the US-4000 as a monitor. The US-4000 EDID can be set to the generic, factory set EDID or it can
copy the EDID of any monitor.
To copy the EDID of a monitor:

Connect the US-4000 HDMI video output port to an input of the desired monitor or equipment which contains
the EDID you wish to copy. Monitor or equipment should be powered on.

Disconnect both the HDMI and the SDI video inputs to the US-4000. (the unit must be idle)

Pull and reseat the US-4000 to power-cycle and reboot the unit. Wait 30 seconds for boot to complete.

Click the “Read EDID from current display” option on this tab page.

The EDID Status line will indicate the EDID is being copied, and then return to ‘ready’.
To reset the EDID to its factory default:

Disconnect both the HDMI and the SDI video inputs to the US-4000. (the unit must be idle)

Pull and reseat the US-4000 to power-cycle and reboot the unit. Wait 30 seconds for boot to complete.

Click the “Reset to default” option on this tab page.

The EDID Status line will indicate the EDID is being reset, and then return to ‘ready’.