KVM-SET-14
APANTAC LLC, 10200 SW ALLEN BLVD STE C, BEAVERTON, OR 97005
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
9
4.4 Function Configurations
Device Name (TX/RX)
To set TX/RX Device name, enter TX/RX Web page ---> [Functions] ---> [Device Name] ---> enter
name (8 characters max) ---> [Apply] to save the Device Name.
K/M over IP (TX) ; KMoIP ports (RX)
The system supports both USB-over-IP and KM-over-IP for USB extension. The USB-over-IP works
as a 5-port Virtual HUB when TX is connected to PC; it is compatible with most kinds of USB
devices such as keyboard, mouse, Pen Drive, Touch Screen… etc.
The KM-over-IP is an HID emulation built for multiple RXs to share keyboard/mouse for one PC, it
takes one port of the 5 virtual ports. The KM-over-IP setting is different for TX and RX:
For TX: enter TX Web page ---> [Functions] ---> [USB over IP] ---> [Compatibility Mode] --->
check/uncheck [K/M over IP] to Enable/Disable ---> [Apply] (default: enabled).
For RX, enter RX Web page ---> [Functions] ---> [KMoIP ports] ---> check/uncheck 1, 2, 3, 4 to
Enable/Disable KM-over-IP ports (default: all disabled) ---> [Apply].
Hotkey (RX)
The RX supports Hotkey for OSD Menu. To choose the RX OSD Hotkey: enter RX Web page --->
[Functions] ---> [Hotkey] ---> select the Hotkey from the list: <Ctrl><Ctrl>, <Shift> <Shift>, <Alt> <Alt>,
or <Scroll> <Scroll> (default: Ctrl Ctrl).
Video over IP (TX)
Enter TX Web page ---> [Functions] ---> [Video over IP] --->
check/uncheck the following options:
[Enable Video over IP] (Default: Enabled)
[Video/Graphic Mode]: Select [Video Mode] for play smoothly. Select
[Graphic Mode] for static picture KVM application.
[Maximum Bit Rate]: The TX provides options of “Best Effort”, “200, 150, 100, 50, 10 Mbps for the
TX bandwidth selection. (default: Best Effort).
[Maximum Frame Rate]: This provides the maximum % of the TX frames rate capture up (default:
100%).
Video over IP (RX)
Enter RX Web page ---> [Functions] ---> [Video over IP] --->
check/uncheck the following options:
[Enable Video over IP] (Default Enabled).
[Enable Video Wall]: Enable this setting for the Video Wall output.
[Copy EDID from this Video Output]: Enable this setting to assign
this RX as the EDID Master.
[Scaler Output Mode]: Select the option of “Auto EDID”, “Pass Through”, “1080p60”, “1080p50”,
“1920x1200”, “Customize” (default Auto EDID)
[Timeout for detecting video lost]: Set the timeout period for the video lost detection (default 10
sec.)
[Turn off screen on video lost]: Enable this setting to stop the video output when video lost (default
Enabled)
USB over IP (TX/RX)
Enter TX/RX Web page ---> [Functions] ---> [USB over IP] ---> [Enable USB over IP] --->
check/uncheck to Enable/Disable (default Enable).
