HDMI-IP-E and HDMI-IP-R
APANTAC LLC,
10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
17
8.2 Setting the streaming bitrate
The HDMI-IP-E output bitrate can be set
Figure 8-5: Output bitrate setting can be changed 1Kbps at a time
8.3 Setting the Multicast ID and IP address
The Streaming setting can be configured. There are 63 (0 to 63) multicast IP
address that can be set.
Important Notes:
1.
For the HDMI-IP-E(TX) and HDMI-IP-R (RX) communicate and find each other, the
Multicast IP address must be set to the same.
2.
When the webpage is first launched, the Multicast IP address is read back from
the HDMI-IP-E/R (Tx/Rx)’s Multicast ID Settings.
3.
If the Multicast IP is set in the Webpage, then the webpage setting will overwrite
the hardware DIP switch setting, until the Tx/Rx has been power cycled
4.
The OSD will reflect the last Unicast IP setting regardless it is done by webpage or
DIP switch
Fig 8-6: Multicast IP setting is read back from the HDMI-IP-E
