HDMI-IP-E and HDMI-IP-R
APANTAC LLC,
10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
13
7.0 OSD (On Screen Display)
There are built-in OSDs in the HDMI-IP-R’s HDMI output that provides various important
information for the setup. The default IP addresses for both the HDMI-IP-E (Tx) and
HDMI-IP-R(Rx), can be obtained from the OSD by simply plugging the HDMI-IP(Rx) HDMI
output to the monitor.
Here is an OSD screen capture when the HDMI-IP-R is plugged into the monitor without
any network connection.
1.
FW Version
2.
RX IP address (HDMI-IP-R) is initially at 0.0.0.0
3.
TX IP address (HDMI-IR-E) is initially at 0.0.0.0
4.
Group ID: It reflects either the hardware Multicast ID DIP Switch (See Section 5)
or the SW Multicast ID Setting (See Section XX)
5.
Device ID: IPTV
6.
Status: Waiting for Connection …
