HDM2.0-4x4-UHD-II
APANTAC LLC,
10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
8
1.
Command List
Once the connection with matrix is established, type “help” in the Hyper Terminal screen,
and then press “Enter” Key to show the command list.
-----------------------------------------------------------
Command Description
-----------------------------------------------------------
help
Display help information
reset
Reset the device
info
Display device information
status
Display device status
r
Set routing status
rs
Display routing status
save
Save the current status to Preset
load
Load settings from Preset
edid
Select input EDID mode
default
Reset to factory default settings
For more information, type '/h' or '?' after each command
-----------------------------------------------------------
2. Command descriptions
2-1 command "r"
Usage:
r x y: Set Input x to Output y
r x: Set all Outputs to Input x
r
Displays the current route status
r x y1 .. yn : Set Input x to Output y1, .. , yn
x = [0-1] (0: disable), y = [0-n] (0: all outputs)
Examples: r 1 2
Examples: r 0
