HDM2.0-4x4-UHD-II
APANTAC LLC,
10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
12
Comformity
Apantac products has been tested and found to comply with the following,
FCC-Class A part 15
CE/C-tick
California Propersition 65
REACH SVHC
EU RoHS 10 Substances Amendment
Limitation of Liability
Apantac’s liability under this warranty shall not exceed the purchase price paid for the
defective product. In no event shall Apantac be liable for any incidental, special or
consequential damages, including without limitation, loss of profits for any breach of this
warranty.
If Apantac replaces the defective Product with a replacement Product as provided under
the terms of this Warranty, in no event will the term of the warranty on the replacement
Product exceed the number of months remaining on the warranty covering the defective
Product.
Equipment manufactured by other suppliers and supplied by Apantac carries the
respective manufacturer’s warranty. Apantac assumes no warranty responsibility either
expressed or implied for equipment manufactured by others and supplied by Apantac.
This hardware warranty shall not apply to any defect, failure or damage:
a)
Caused by improper use of the Product or inadequate maintenance and care of
the Product;
b)
Resulting from attempts by those other than Apantac representatives to install,
repair, or service the Product;
c)
Caused by installation of the Product in a hostile operating environment or
connection of the Product to incompatible equipment;
