1. Install the ionizing air blower and the matching power adapter firmly in the best discharge position.
2. Insert the power network cable into the adapter and the ionizing air blower RJ45 network port, and insert the three-phase power cable of the
adapter into the row socket.
3. Touch the power switch on the front panel of ionizing air blower. It will automatically brush the needle after starting and the fan works normally
when the indicator light is green.
Installation steps
Technical tips
Wall
Packing accessories
AP2930003
1
8YXG25110
1
8WXI00004
1
AP2253011
1
Products Use
Installation steps/technical tips/Packing accessories
1. Place the ionizing air blower in the work area where static electricity is to be eliminated and the installation angle is perpendicular to the surface
of the charged body.
2. Ionizing air blower should be at least 300mm away from the metal conductor and metal grounding body. The ionizing air blower must be
reliably connected to the ground wire.
3. Two ionizing air blowers should be installed side by side with an interval of more than 400mm and more than 200mm away from obstacles such
as walls.
4. The air inlet is at least 150mm away from the wall.
Part name
Picture
Part No.
Specification
Q'TY
Power adapter
GRT-240200
：
DC24V 2A
，
Dual-port output
，
size
：
123*61*40.5mm
（
L*W*H
）
National standard
power cord
Standard 1.8m
，
Optional 3m/5m
Power cable
Standard 2.5m
，
Optional 5m/10m
Remote control
IR remote control
，
84×38mm
Wall
Wall
