FBL2360 Brushless DC Motor Controller Datasheet
3
Power Wires Identifications and Connection
Important Safety Disclaimer
Dangerous uncontrolled motor runaway condition can occur for a number of
reasons, including, but not limited to: command or feedback wiring failure,
configuration error, faulty firmware, errors in user script or user program, or
controller hardware failure.
The user must assume that such failures can occur and must make his/her system
safe in all conditions. Roboteq will not be liable in case of damage or injury as a
result of product misuse or failure.
Power Wires Identifications and Connection
Power connections are made by means of faston tabs located at the back of the controller.
I/O Connector
Hall Sensors
Connector
USB
Connector
LEDs
STO
Jumper
(T-version)
FIGURE 1. FBL2360 front view
Pwr
Ctrl
VMOT
GND
U1
V1
W1
U2
V2
W2
FIGURE 2. FBL2360 rear view
3
FBL2360_1691-21588-0001-D-0720
