FBL2360 Brushless DC Motor Controller Datasheet
1
FBL2360
RoboteQ’s FBL2360 is a features-packed, high-current, dual
or single channel controller for brushless DC motors. The
controller can operate in one of several modes in order to
sense the rotor position and sequence power on the motor’s
3 windings in order to generate smooth continuous rotation.
The controller also uses the Hall sensor and/or Encoder
information to compute speed and measure travelled distance
inside a 32-bit counter. The motors may be operated in open
or closed loop speed mode, position mode or in torque mode.
The FBL2360 features several Analog, Pulse and Digital I/
Os which can be remapped as command or feedback inputs,
limit switches, or many other functions. The FBL2360 accepts
commands received from an RC radio, Analog Joystick,
wireless modem, or microcomputer. For mobile robot
applications, the controller’s two motor channels can either be
operated independently or mixed to move and steer a vehicle.
Using CAN bus, up to 127 controllers can be networked at up
to 1Mbit/s on a single twisted pair.
Numerous safety features are incorporated into the controller to
ensure reliable and safe operation. The controller’s operation can
be extensively automated and customized using Basic Language
scripts. The controller can be configured, monitored and tuned
in real-time using a RoboteQ’s free PC utility. The controller can
also be reprogrammed in the field with the latest features by
downloading new operating software from Roboteq.
Applications
•
Automatic Guided Vehicles
•
Small Electric Vehicles, Electric Bikes
•
Terrestrial and Underwater Robotic Vehicles
•
Police and Military Robots
•
Hazardous Material Handling Robots
•
Balancing Robots
•
Telepresence Systems
•
Animatronics
Key Features
•
USB, Serial, 0-5V Analog, or Pulse (RC radio) command
modes
•
One RS232 serial port
•
CAN bus interface up to 1Mbit/switch multiple protocol
support
•
RS485
•
Optional Ethernet interface
•
Auto switch between Serial, USB, CAN, Analog, or
Pulse based on user-defined priority
•
Built-in dual 3-phase high-power drivers for two
brushless DC motor at up to 60A
•
Output channels can be paralleled in order to drive a
single motor at up to 120A
•
Multiple Motor Operating mode
- Trapezoidal with Hall Sensors
- Sinusoidal with Encoders
- Sinusoidal with Hall Sensors
•
Support for absolute angle encoders
•
sin/cos analog
•
SSI (A & T version)
•
Resolver (A & T version)
•
Field Oriented Control in Sinusoidal modes
•
Full forward & reverse motor control. Four quadrant
operation. Supports regeneration
•
Operates from a single 10V-60V power source
•
STO - Safe Torque Off support (T-version) - Certification
No. M6A 104504 0001 Rev. 00
•
Design compliant/approval UL 61800-5-1
•
Programmable current limit up to 60A (120Aon single
channel version) per motor for protecting controller,
motor, wiring and battery.
•
Separate connector for Hall Sensors
•
Accurate speed and Odometry measurement using
Hall Sensor or Encoder data
Advanced Features
2 x 60A or 1 x 120A
Brushless DC
Motor Controller
with USB and CAN
1
FBL2360_1691-21588-0001-D-0720
