AP Machinebouw B.V.
- 4 -
Manual AP silage cutter NP
*
Be careful when you work on sloping surfaces and / or on uneven terrain and
make sure you keep enough stability.
*
When you drive on the public road with the AP silage cutter the general
traffic rules are valid. In principle, the AP silage cutter provides no danger
on the public road. Make sure that the cutting frame of the silage cutter is
completely closed and that the lifting arms of the front loader, wheel loader
or telescopic loader are adjusted so low that they do not obstruct the view
(see image 1).
*
It is not allowed to use the AP silage cutter on the public road for
transportation purposes.
* If oil leakage appears in the hydraulic system, the oil can penetrate the skin
and cause heavy injuries. Never try to close a leakage by hand. Immediately
contact a physician when someone gets hurt.
*
It is strictly forbidden to alter the adjustment of the pressure relief / safety
valve, this can i.a. lead to damaging of the system and / or personal injury.
*
Make sure that all coupling pins, if present, are provided with original and
undamaged safety bolts.
* Only couple the AP silage cutter with the regulated means. Be careful during
coupling and uncoupling of the AP silage cutter.
*
In the absence of a quick release system, during the coupling or uncoupling
of the silage cutter to the three-point-linkage, front loader, the lifting arms
of the wheel loader or telescopic loader, switch off the engine and engage
the parking brake.
Image 1
