AP Machinebouw B.V.
- 15 -
Manual AP silage cutter NP
7
.1.2 Folding of the base:
Please follow the next steps thoroughly and chronological order.
1
Start position:
The silage cutter is coupled, placed on a flat surface,
the push-off system stands on the head tube and the
cutting frame is closed,
2
Completely open the cutting frame,
3
Fully extend the push-off device,
4
Switch off the engine of the tractor, wheel loader or telescopic loader and
lock the parking brake,
5
Lift the base with the hand in vertical position until the plate can be locked,
WARNING:
Be careful during lifting the base. An unexpectedly base
falling down can cause serious injuries!
6
Secure the lock,
7
Start the engine of the tractor, wheel loader or telescopic loader and push
back the push-off system on the head tube,
8
Close the cutting frame,
9
The silage cutter and the push-off system is now ready for use.
7.2
Removable inlay (IB):
The inlay (IB) is an accessory that cannot be used on silage cutters without a push-
off system. In principle it has the same function as the push-off system with folding
base (HAN) and significantly increases the number of use of the silage cutter. The
inlay makes it possible to use your silage cutter for scooping up wet by-products
and / or other products with little or no structure.
