Installation of DAC DT-1 driver
Installation of Foobar2000 software and ASIO plug-in
Related questions
1. Download the Dilvpoetry DAC DT-1 driver from the AOSHIDA website:
( http://aoshida-audio.com/pages/driver-download )
2. After installation, click the speaker icon at the bottom right of the
computer, click the playback device, and then select "HIFI USB AUDIO"
as the default device.
This machine must be installed with foobar2000 software and ASIO plug-in.
Please download and install it yourself, and use it after correct setting.
If you have any problems with the settings, please contact the product dealer.
Q：Can the tube be hot-plugged?
A
：
Hot-plugging is not allowed. The electronic tube has high-voltage
power supply, and it is easy to produce arcs at the moment of plugging and
unplugging, which may damage the device. Moreover, the electronic tube
is a high-temperature device, which is easy to hurt hands. Please plug and
unplug the tube when it is turned off and cooled down.
Q：Can the tube be replaced?
A
：
The tube of
DAC DT-1
is 6N3. Recommended replacement tube model:
6H3N/6H3N-E/6H3N-EB/6H3N-N/GE5670W.
Q
：Can the op amp chip be replaced? Is there an op amp socket ?
A
：
There is no
op amp socket. The op amp configuration is already good.
The machine assembly is relatively complicated, and it is not
recommended to replace the op amp chip.
12
