
OLED display description
Operation
A: Input channel display area (respectively display USB/BT/COA/OPT according to
the selection)
B: Input sampling rate display area, it will display when there is no signal input
----
C: Volume display area, Volume 0-99
D: At the bottom is the volume progress bar
* AUTO / LINE+HP mode will be displayed when the output mode is switched.
1. Insert the matching tube into the tube socket of the product (the tube is not
divided into left and right, if the tube pin is deformed, just
dial it straight by hand)
2.Connect the back-end equipment that needs to be connected to the RCA
output interface of the product.
3.Connect the audio source to be used to the input interface of the
corresponding product
4.Connect the power supply.
5.Short press to turn on, and short press
again to select the input channel.
6.In Bluetooth mode, you need to switch to the Bluetooth channel to pair
and connect.
7.Double-click the power button on the machine to enter the output mode
selection. Press the /- keys to switch between
AUTO or LINE+HP
mode.
It can also be set via
the
OUTPUT MODE button on the remote control.
When setting, the screen will display LINE+HP or AUTO two modes.
8.When the earphone is plugged
in
, the
RCA
analog output will be automatically
disconnected (AUTO mode is for the earphone and
RCA
to
switch
automatically,
and the LINE+HP mode is for the earphone and RCA to be output synchronously).
9.After use, press and hold for 3 seconds to shut down.
60
----
Volume
KHz
Input
USB
A
B
C
11