AOR AR-IQ-III, Руководство по эксплуатации

Страница: 18 / 24

15
7-1 Recording
To record, first select the center frequency of your choice.
Click on the record button at the bottom left of the window.
A new window pops up asking for a user defined file name and folder location to store the file. For ease of use it is
advised to create a file name which includes the date, such as 180622 for June 22, 2018. The software will amend this
file name with _000 to become 180622_000.
Note: During recording and playback, the frequency range (start and end frequency) cannot be changed.
7-2 Playback
To play back a file which has been recorded at an earlier time, click on the "Wav" button, within the "INPUT SELECT"
panel.
The receiver stops receiving live signals and the "Wav" and "File" buttons are now activated. Click "File" and browse on
the PC to the location of the pre-recorded file(s).
If your previous recording has created numerous automatically named files, the software will playback the
whole series of files if required. This playback should be continuous and flawless, even during track / file change.
During playback, the software will display date and time in the same format as during recording.
Note: Playback of a .wav file will also work if the receiver is not connected to the PC.
•
Playback will only work properly if the data is read off an internal HDD, or SSD. It is unlikely to function well off
a USB key, USB hard-drive, DVD disk, or any networked storage device.
7-3 Fast forward & rewind
Left click anywhere on the progress bar to advance to a chosen point of the recording.
To loop the playback over a smaller selection, simply left click and hold at the desired spot on the progress bar. Drag
the mouse pointer along to the right to create a new line, which will be a much paler shade of yellow. Release the
mouse button to start playback immediately from the new desired spot. This should be flawless and instant. The player
will repeat the new selected section only, over and over, until manually stopped. This may be useful if the user wishes
Actual playback point
Looped selection