32
LED Indication
LED indication including Boot LED and AGP LED are AOpen’s considerate designs
that aim at providing you friendly system information.
BOOT LED will keep blinking when you power the system on and when your
system is under POST (Power-On Self Test). After POST diagnoses everything all
right and finishes the booting, the LED will stay on otherwise it will remain
flashing to warn you that mistakes have occurred during POST
AGP LED aims to protect your motherboard from being damaged by over voltage
of AGP card. When AGP Protection Technology is implemented, this motherboard
will automatically detect the voltage of AGP card and prevent your chipsets from
being burnt out. Please note that if you install an AGP card with 3.3V, which is not
supported by VIA KM400A chipset, the AGP LED on the motherboard will light up
to warn you the possible damage of the exceeding voltage.
AGP LED
BOOT LED
