Overview
1-6
Option2: Use
/partition
switch (applied to FAT16/FAT32 file system):
To create a separate partition for Suspend to Hard Drive, please make sure
you have reserved a free partition. We suggest you reserve the free
partition which space is appropriate for your future memory expansion. For
example, if you have 32MB of system memory and 4MB of VGA memory
currently, but you plan to upgrade system memory to 64MB in the near
future, then you may reserve a 68MB (64MB+4MB) space by using a disk
utility (such as fdisk). Next, use following command to create a suspend
partition:
C:>AOZVHDD /c /partition
If there is no extra free partition and you don't want your data lost, please do
not use this partition method.
6. After creating above partition or hidden file, please reboot your system.
7. Push suspend switch (momentary mode) or use Win95 Suspend icon to
force system goes into Suspend to Hard Drive mode and then turn system
power off by power switch of your power supply.
8. Next time when you turn on your system, it will resume to your original work
automatically.
Warning:
Note that Intel Bus Master and Ultra DMA/33 IDE
driver are not fully compatible with Suspend to Hard Drive
function, installing these drivers may cause the system
unstable. Under this situation, please uninstall the drivers.
Warning:
This function does not support SCSI hard disks.
