AOpen MX64, Руководство пользователя

Страница: 20 / 36

Hardware Installation
2-13
2.3.10 Panel Connector
The Panel (multifunction) connector is
a 20-pin connector marked as
PANEL
on the board. Attach the power LED,
keylock, speaker, SPWR, IDE LED and
reset switch to the corresponding pins
as shown in the figure.
If your ATX housing supports ACPI
specification, the ACPI & Power LED
will keep flashing if you have enabled
“suspend mode” item in the BIOS
Setup.
1
SPWR
GND
ACPI & POWER LED
GND
+5V
GND
GND
GND
RESET
GND
11
10 20
GND
KEYLOCK
+5V
IDE LED
IDE LED
+5V
+5V
GND
NC
SPEAKER
PANEL
1
Speaker
IDE LED
Keylock
Reset
11
10 20
+
+
+
+
SPWR
+
+
ACPI &
Power LED
PANEL
Caution: Locate the power switch cable from
your ATX housing. It is 2-pin female connector
from the housing front panel. Plug this
connector onto the soft-power switch connector
on the panel, which is marked as
SPWR .
2.3.11 IrDA Connector
The IrDA connector can be configured to support wireless infrared module,
with this module and application software such as Laplink or Win95 Direct
Cable Connection, the user can transfer files to or from laptops, notebooks,
PDA devices and printers. This connector supports HPSIR (115.2Kbps, 2
meters) and ASK-IR (56Kbps).