On the strength of Broadcom Gigabit LAN controller (MX4SG-L) or Broadcom 10/100Mbps
LAN controller (MX4SG-N) on board, which is a highly integrated platform LAN connect
device, it provides gigabits or 10/100Mbps Ethernet for office and home use. The Ethernet
RJ45 connector is located on top of USB connectors. The right-hand side LED on RJ45
connector indicates Active mode; it shows yellow when accessing to network. The left-hand
side LED on RJ45 connector indicates connecting mode; it lights in orange when 100Mbps
LAN is connected (no light while 10Mbps is connected), and lights in green when gigabits LAN
is connected. To enable or disable this function, you can simply adjust it in BIOS.
14.
10/100Mbps(MX4SG-N) and Gigabits (MX4SG-L) LAN Onboard
15. AOpen Bonus Pack CD
17. BIOS Upgrade
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps,
and it’s STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1.
Download the new version of BIOS package
zip
file from our official web site. Unzip
the download BIOS package (ex: WMX4SGN102.ZIP) with WinZip
(
http://www.winzip.com
) in Windows environment.
2.
Save the unzipped files into a folder, for example, WMX4SGN102.EXE &
WMX4SGN102.BIN.
3.
Double click on WMX4SGN102.EXE, EzWinFlash will detect the model name and
BIOS version of your motherboard. If you had got the wrong BIOS, you will not be
allowed to proceed with the flash steps.
4.
You may select preferred language in the main menu, then click [Start Flash] to start
the BIOS upgrade procedure.
5.
EzWinFlash will complete all the process automatically, and a dialogue box will pop up
to ask you to restart Windows. You may click [YES] to reboot Windows.
6.
Press <Del> at POST to
enter BIOS setup
, choose "Load Setup Defaults", then “Save
& Exit Setup”. Done!
It is strongly recommended NOT to turn off the power or run any application during
FLASH PROCESS.
16. Power-on and Load BIOS Setup
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name. After selecting the model name, you can install its INF, Audio, LAN and
USB2.0 drivers from this CD.
Del
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU,
DRAM, HDD, etc.) are good enough
for turbo setting.
After you finish jumper settings and connect correct cables, power on and enter
the BIOS Setup. Press <Del> during POST (Power On Self Test). Choose "Load
Setup Defaults" for recommended optimal performance.
Right: Active (Yellow)
Left: Connecting
Orange (100Mbps)
Green (Gigabit)
