1.
Pull up the CPU socket lever and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for
a (golden) cut edge on the CPU upper
interface.
Match Pin 1 and cut edge.
Then insert the CPU into the socket.
3.
Press down the CPU socket lever and
finish CPU installation.
Plug in the CPU fan cable to the 3-pin
CPUFAN1
connector. If you have chassis fan, you
can also plug it in
SYSFAN2
or
SYSFAN3
connector.
3. Installing Processor
5. Setting CPU Voltage & Frequency
CPU Ratio
8x, 10x… 21x, 22x, 23x, 24x
CPU FSB (By BIOS table)
100-255MHz.
MX4LR-GN(100MHz x 4)
CPU
CPU Core
Frequency
FSB Clock
System
Bus
Ratio
Celeron 1.7G
1700MHz
100MHz
400MHz
17x
Celeron 1.8G
1800MHz
100MHz
400MHz
18x
Celeron 2.0G
2000MHz
100MHz
400MHz
20x
Pentium 4 1.6G
1600MHz
100MHz
400MHz
16x
Pentium 4 1.7G
1700MHz
100MHz
400MHz
17x
Pentium 4 1.8G
1800MHz
100MHz
400MHz
18x
Pentium 4 1.9G
1900MHz
100MHz
400MHz
19x
Pentium 4 2.0G
2000MHz
100MHz
400MHz
20x
Pentium 4 2.2G
2200MHz
100MHz
400MHz
22x
Pentium 4 2.4G
2400MHz
100MHz
400MHz
24x
MX4GVR-GN(133MHz x 4)
CPU
CPU Core
Frequency
FSB Clock
System
Bus
Ratio
Pentium 4 2.4G
2400MHz
133MHz
533MHz
18x
Pentium 4 2.53G
2530MHz
133MHz
533MHz
19x
Pentium 4 2.66G
2660MHz
133MHz
533MHz
20x
Pentium 4 2.80G
2800MHz
133MHz
533MHz
21x
Pentium 4 3.06G
3060MHz
133MHz
533MHz
23x
Setting CPU Core Voltage
This motherboard supports CPU VID function. The CPU core voltage will be automatically
detected.
Setting CPU Frequency
This motherboard is CPU jumper-less design, you can set CPU frequency through the
BIOS setup, and no jumpers or switches are needed. The default setting is "table select
mode". You can adjust the FSB from "CPU Host/SDRAM/PCI Clock" for overclocking.
BIOS Setup > Frequency / Voltage Control > CPU Frequency Setup
Note:
If you do not match the CPU
socket Pin 1 and CPU cut edge well,
you may damage the CPU.
Note:
Some CPU fans
do not have sensor pin
so they cannot support
fan monitoring.
CPUFAN1 Connector
Warning:
Intel
®
845GL
chipset supports
maximum 400MHz
(100MHz x 4) system
bus and 66MHz AGP
clock; Intel
®
845GV
chipset supports
maximum 533Hz
(133MHz x 4) system
bus and 66MHz AGP
clock, higher clock
setting may cause
serious system
damage.
4. Installing CPU & System Fan
SYSFAN2 Connector
CPU Pin 1 and cut edge
GND
+12V
SENSOR
GND
+12V
SENSOR
Note:
Since the latest
processor, Northwood,
would detect the clock
ratio automatically, you
may not be able to
adjust the clock ratio in
BIOS manually.
GND
+12V
SENSOR
This socket supports FC-PGA2 package CPU, which is the latest CPU package developed
by Intel. Other forms of CPU package are impossible to be fitted in.
CPU socket lever
SYSFAN3 Connector
