1. JP14 Clear CMOS
This motherboard has AC97 sound onboard. JP12 is used to enable or disable onboard AD1885
CODEC chip. If you select Disable, you can use your preferred PCI sound card.
2. JP12 Enable/Disable Onboard Audio
Everything you need to boot this
motherboard is included in this Easy
Installation Guide. For more
information, a complete
Online User's
Manual
can be found in the
Bonus
Pack CD Disc
. Thanks for the help of
saving our earth.
Tip:
When should I Clear CMOS?
1. Boot fail because of overclocking…
2. Forget password…
3. Troubleshooting…
You can clear CMOS to restore system default setting. To clear
the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pins 1-2.
5. Connect ATX power cable back to connector PWR2.
PART NO.: 49.88502.007
DOC. NO.: MX34-EG-E0103D
Disable
Enable
1
2
3
1
2
3
Normal Operation
(default)
Clear CMOS
1
2
3
1
2
3
Hard Drive IDE Cable x 1
80-Wire IDE Cable x 1
Floppy Drive Cable x 1
Bonus Pack CD disc x 1
This Easy Installation Guide x 1
