D
D
X
X
P
P
S
S
/
/
D
D
X
X
P
P
S
S
P
P
l
l
u
u
s
s
/
/
D
D
X
X
P
P
S
S
-
-
U
U
/
/
D
D
X
X
P
P
S
S
P
P
l
l
u
u
s
s
-
-
U
U
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
107
The SCSI controller always checks parity when reading from the SCSI bus to verify the correct transmission of data from the
SCSI devices. You should disable the SCSI Parity Checking parameter if any of the installed SCSI devices do not support SCSI
parity. Most currently available SCSI devices support this feature.
Using
and
then press
to select options. Press
at any time to return to the previous menu.
Boot Device Options
This parameter shows the target ID of your boot device. The default setting is 0 (zero). We recommend that you keep the default
setting since most system applications run only in this setting. Below is the Boot Device Configuration menu screen.
Adaptec AIC-7902W SCSISelect (TM) Utility v2.10
BIOS
Information
Interrupt (IRQ) Channel………………………………..11
AIC-7902W at Bus:02h Device:09h Channel:A
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID …………………………………7
Boot Device Configuration
Select SCSI peripheral from which to boot.
To view peripheral by ID# select "SCSI Disk Utilities" from previous menu.
Boot Channel…………………………………………..A First
Boot SCSI ID……………………………………………0
------Option Listed Below Has NO EFFECT if MULTI LUN Support is disabled------
Boot LUN Number………………………………………0
