1. Installing CPU
2. Installing CPU & Housing Fans
Everything you need to boot
this motherboard is included in
this Easy Installation Guide.
For more information, a
complete
Online User's Manual
can be found in the
Bonus
Pack
. Thanks for the help of
saving our earth.
PART NO: 90.59F28.001
DOC. NO: DXPLPLUSU-EG-E0302A
!
Screw Pack for I/O Port
!
Easy Installation Guide x 1
!
MB Layout and jumper setting sticker label x1
!
Ultra320 SCSI Cable x 1 (DXPL Plus-U only)
!
Floppy Cable x 1
!
IDE1 Cable x 1
!
IDE 2 Cable x 1 (DXPL-U only)
!
Bonus Pack CD x 1
!
Norton Anti-Virus CD x 1
!
I/O Port Bracket x 1
!
Floppy/IDE Cable Package
!
Plate plastic for retention module assembly x2
Plug in the CPU fan cable to the 3-pin
CPU FAN
connector and housing fan cable to the
Chassis
Fan
connectors.
1.
Pull up the CPU socket lever and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for a
(golden) cut edge on the CPU upper interface.
Match Pin 1 and cut edge. Then insert the
CPU into the socket.
3.
Press down the CPU socket lever and finish
CPU installation.
Note:
If you do not match the CPU
socket Pin 1 and CPU cut edge
well, it may damage the CPU.
CPU Pin 1 and cut edge
CPU socket lever
Note:
Some CPU fans do not have sensor pin, so that
cannot support fan monitoring.
GND
+12V
SENSOR
Chassis Fan
CPU2 Fan
GND
+12V
SENSOR
SENSOR
+12V
GND
CPU1 Fan
Chassis Fan
GND
+12V
SENSOR
SENSOR
+12V
GND
Chassis Fan
