Setup Utility
2-31
2. Open the computer housing and set JP4 to 1-2 (Check password)
to check the password function. See section 1.4 for the location of
JP4.
3. Close your computer
housing and reboot your system.
The next time you want to enter the BIOS utility, you must key in your
Setup password.
To remove your Setup Password:
1.
Disable
the Setup Password parameter in the System Security
menu by pressing the
or
arrow key to select
None
.
2.
Press
to return to the System Security menu and then press
again to exit Setup.
3.
Press
Yes
to save your settings and exit Setup Utility. Your
previous password will be removed from CMOS.
Remember to set JP4 to 2-3 (Bypass
password) because you won
be able to
access Setup Utility if a password does not
exist and JP4 is set to 1-2 (Check password).
To set JP4 to 2-3 (Bypass password):
1.
Turn off and unplug the computer.
2. Open the computer housing and set JP4 to 2-3 (Bypass
password) to bypass the password function. See section 1.4 for
the location of JP4.
3. Close your computer
housing and reboot your system.
