2-30
User’s Guide
2.
Enable
the Setup Password parameter in the System Security
menu by pressing the
or
arrow key. The Setup
Password window appears:
Setup Password
Enter your new Setup Password twice. Setup Password
may be up to 7 characters long.
Enter Password.................. [xxxxxxx]
Enter Password again............ [xxxxxxx]
Set or Change Password
3.
Type a password in the Enter Password field. The password may
consist of up to seven characters.
Be very careful when typing your password
because the characters do not appear on the
screen.
4. Press
. Retype your password in the Enter Password again
field to verify your first entry.
5. Highlight
Set
or
Change
Password
and
press
.
The parameter will change to [Present].
6. Press
to return to the System Security menu and then press
again to exit Setup.
7.
Press
Yes
to save your settings and exit the Setup Utility. Your
password will be saved to CMOS.
For the password to take effect you must set jumper JP4 to 1-2
(Check password):
1.
Turn off and unplug the computer.
