1. Installing CPU
2. Installing CPU & Housing Fan
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
Online
User's Manual
can be found in the
Bonus Pack CD Disc
. Thanks for
the help of saving our earth!
PART NO: 90.58C30.007 DOC. NO: DX3RPU-EG-E0112A
Hard Drive IDE Cable x 1
Ultra 160 SCSI 68 pin Cable x 1 (DX3R Plus-U only)
Ultra Narrow 50 pin Cable x 1 (DX3R Plus-U only)
2
nd
USB cable x 1
COM Port Cable x 1
Bonus Pack CD x 1
Norton Anti-Virus CD x 1
CPU Terminator x 1
IO Bracket for SV520 x 1
IO Bracket for Open Market Housing x 1
SCSI Utility Diskette Pack x 1 (DX3R Plus-U only)
User Manual x 1
This Easy Installation Guide x 1
Plug in the CPU fan cable to the 3-pin
CPU FAN
connector and housing fan cable to the
Housing Fan
connector.
1.
Pull up the CPU socket level and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for a
(golden) cut edge on the CPU upper interface.
Match Pin 1 and cut edge. Then insert the
CPU into the socket.
3.
Press down the CPU socket level and finish
CPU installation.
Note:
If you do not match the CPU
socket Pin 1 and CPU cut edge
well, it may damage the CPU.
CPU Pin 1 and cut edge
CPU socket lever
Note:
Some CPU fans do not
have sensor pin, so that cannot
support fan monitoring.
CPU fan
+12V
Fan Off (GND)
Fan Fail
Sensor
GND
Sensor
+12V
System fan
connector
