This feature is very similar as Wake On Modem, but it goes through local area network.
To use Wake On LAN function, you must have a network card with chipset that supports
this feature, and connect a cable from LAN card to motherboard WOL connector.
12. Connecting SCSI Card LED Connector (DX34 Plus-U only)
10. Connecting 68-pin Ultra3 SCSI Cable (DX34 Plus-U only)
The DX34Plus-U provides two 68-pin Ultra Wide/Ultra 2/3 SCSI connectors for 16-bit or
16-bit differential SCSI devices.
11. Connecting Front Panel Connector
Attaching such as power LED, speaker, reset switch, power switch connector, etc.… to
corresponding pins.
The 4-pin SCSI LED connector can be connected to a PCI SCSI control card activity
LED connector. Read or write activity by devices connected to the SCSI card will make
the LED lighting up.
68-pin SCSI Ultra3 Connectors
-
+
+
-
-
+
+
-
CN23
CN24
ATX
Power Switch
Power LED
Reset Switch
HDD LED
Chassis
Intrusion Switch
1
2
21
22
+5VSB
GND
HDD LED
GND
+5V
+5V
PWR LED
HDD LED
+5V
INT S/W
RST S/W
GND
GND
1
2
21
22
13. Wake On LAN
+5VSB
GND
LID
