1.Installing Processor
2. Installing CPU & Housing Fan
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
Online
User's Manual
can be found in the
Bonus Pack CD Disc
. Thanks for
the help of saving our earth!
PART NO: 90.50F30.007 DOC. NO: DX34PU-EG-E0112C
Hard Drive IDE Cable x 1
80-Wire IDE Cable x 1
Floppy Drive Cable x 1
Ultra 160 SCSI 68 pin Cable x 1 (DX34 Plus-U only)
Bonus Pack CD disc x 1
User Manual x 1
This Easy Installation Guide x 1
I/O Bracket x 1
ASM Lite x 1
Plug in the CPU fan cable to the 3-pin
CPU FAN
(P1_FAN & P2_FAN) connector and housing fan cable to
the
System Fan
(S1_FAN & S2_FAN) connector.
1.
Pull up the CPU socket lever and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for a
(golden) cut edge on the CPU upper interface.
Match Pin 1 and cut edge. Then insert the
CPU into the socket.
3.
Press down the CPU socket lever and finish
CPU installation.
Note: If you do not match the CPU
socket Pin 1 and CPU cut edge well,
it may damage the CPU.
CPU fan connector
(P1_FAN & P2_FAN)
System fan connector
(S1_FAN)
GND
+12V
Sensor
Sensor
+12V
GND
GND
+12V
Sensor
System fan connector (S2_FAN)
CPU socket lever
CPU Pin 1 and cut edge
