AOpen DX2G Plus System Board
1-29
Table 1-4
System Error Messages
Message
Action
Hard Disk 0 Extended Type
Error
Run Setup
*
.
Hard Disk 1 Extended Type
Error
Run Setup*.
IRQ Setting Error
Run Setup* to make sure there is
no IRQ device conflict.
I/O Parity Error
Contact your dealer.
I/O Resource Conflict(s)
Check ISA add-on card, serial
port, and parallel port to make
sure there is no IRQ and I/O
address conflict.
I2C Interface or Device(s)
Error, System Halt
Shut down and disconnect the
power cable or contact your
dealer.
PS/2 Keyboard Error or No
Keyboard Connected
Check and connect the keyboard
to the system unit.
PS/2 Keyboard Interface Error
Replace the keyboard or contact
your dealer.
PS/2 Pointing Device Error
Check and connect pointing
device connection.
PS/2 Pointing Device Interface
Error
Run Setup and check pointing
device.
Memory Error at:
MMMM:SSSS:OOO
(W:XXXX, R:YYYY)
where:
M: MB, S: Segment,
O: Offset,
X/Y: write/read pattern
Check DIMMs on the system
board. Contact your dealer.
* Press
during POST to enter the BIOS Setup screen.
