AWARD BIOS
3-4
Standard CMOS
à
Primary Master
à
Type
Standard CMOS
à
Primary Slave
à
Type
Standard CMOS
à
Secondary Master
à
Type
Standard CMOS
à
Secondary Slave
à
Type
Type
Auto
User
None
This item lets you select the IDE hard disk parameters that
your system supports. These parameters are Size, Number
of Cylinder, Number of Head, Start Cylinder for Pre-
compensation, Cylinder number of Head Landing Zone and
Number of Sector per Track. The default setting is
Auto
,
which enables BIOS to automatically detect the parameters
of installed HDD (Hard Disk Drive) at POST (Power-On Self
Test). If you prefer to enter HDD parameters manually,
select User. Select None if no HDD is connected to the
system.
The IDE CDROM is always automatically detected.
Tip:
For an IDE hard disk, we recommend that
you use the "IDE HDD Auto Detection" to enter
the drive specifications automatically. See the
section "IDE HDD Auto Detection".
Standard CMOS
à
Primary Master
à
Mode
Standard CMOS
à
Primary Slave
à
Mode
Standard CMOS
à
Secondary Master
à
Mode
Standard CMOS
à
Secondary Slave
à
Mode
Mode
Auto
Normal
LBA
Large
The enhanced IDE feature allows the system to use a hard
disk with a capacity of more than 528MB. This is made
possible through the Logical Block Address (LBA) mode
translation. The LBA is now considered a standard feature
of current IDE hard disk on the market because of its
capability to support capacity larger than 528MB. Note that
if a HDD is formatted with LBA On, it will not be able to boot
with LBA Off.
