Hardware Installation
2-5
INTEL Pentium II
CPU Core Frequency
Ratio
External Bus Clock
Celeron 333
333MHz =
5x
66MHz
Celeron 366
366MHz =
5.5x
66MHz
Celeron 400
400MHz =
6x
66MHz
Celeron 433
433MHz =
6.5x
66MHz
Celeron 466
466MHz =
7x
66MHz
Warning:
The INTEL 440ZX chipset supports a maximum of
100MHz FSB clock, the higher clock settings are for internal test
only.
These settings exceed the specification of the ZX chipset,
which may cause serious system damage
.
2.2.2 Setting the CPU Voltage
This motherboard supports Pentium II / Pentium III / Celeron VID function, the
CPU core voltage is automatically detected, the range is from 1.3V to 3.5V.
For overclocking, the CPU voltage also can be adjusted in the BIOS Setup. The
CPU voltage is adjustable by going into:
Chipset Features
à
CPU Voltage Set to
However, note that enlarging the core voltage is probably harmful to your CPU.
2.2.3 Clearing the CMOS
JP14
1-2
2-3
Clear CMOS
Normal operation
(default)
Clear CMOS
You need to clear the CMOS if you forget
your system password. To clear the CMOS,
follow the procedure below:
JP14
1 2 3
Normal Operation
(default)
JP14
1 2 3
Clear CMOS
