1.
First, don’t install any add-on card except AGP card.
2.
Install Windows 95 OSR2 v2.1, 1212 or 1214 version and later with USB
support. Otherwise, you need to install USBSUPP.EXE.
3.
Install the VIA 4 in 1 driver, which includes VIA AGP Vxd driver, IRQ routing
driver, and VIA chipset function registry program.
4.
Finally, Install other add-on cards and their drivers.
Installing Windows 95
Power-on and Load BIOS Setup
After you finish the setting of jumpers and connect correct cables. Power
on and enter the BIOS Setup, press <Del> during
POST (Power-On
Self Test)
. Choose "
Load Setup Defaults
" for recommended optimal
performance.
Del
Autorun Menu from Bonus CD Disc
You can use the autorun menu of Bonus CD disc. Choose the utility and driver and
select model name.
Warning:
Please avoid of using
"Load Turbo Defaults", unless you
are sure your system components
(CPU, DRAM, HDD, etc.) are good
enough for turbo setting.
Installing Windows NT
Installing Windows 98
It is not necessary to install VIA 4 in 1 driver, just follow the installation guide of NT
and your add-on cards
1.
First, don’t install any add-on card except AGP card.
2.
Enable USB Controller in BIOS Setup > Integrated Peripherals > OnChip USB,
to make BIOS fully capable of controlling IRQ assignment.
3.
Install Window 98 into your system.
4.
Install the VIA 4 in 1 driver, which includes VIA AGP Vxd driver, IRQ routing
driver, and VIA chipset function registry program.
5.
Finally, Install other add-on cards and their drivers.
