Plug in the CPU fan cable to the 3-pin
CPUFAN1
connector. If you have chassis fan, you
can also plug it on
SYSFAN2
or
SYSFAN3
connector.
1.
Pull up the CPU socket lever and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for
a (golden) cut edge on the CPU upper
interface.
Match Pin 1 and cut edge.
Then insert the CPU into the socket.
3.
Press down the CPU socket lever and
finish CPU installation.
CPU Ratio
8x, 9x, 10x… 21x, 22x, 23x, 24x
CPU FSB
100-400MHz
Northwood CPU
CPU Core Frequency
FSB Clock
System Bus
Ratio
Pentium 4 2.0G
2000MHz
100MHz
400MHz
20x
Pentium 4 2.2G
2200MHz
100MHz
400MHz
22x
Pentium 4 2.26G
2260MHz
133MHz
533MHz
17x
Pentium 4 2.4G
2400MHz
100MHz
400MHz
24x
Pentium 4 2.4G
2400MHz
133MHz
533MHz
18x
Pentium 4 2.53G
2530MHz
133MHz
533MHz
19x
Pentium 4 2.6G
2600MHz
200MHz
800MHz
13X
Pentium 4 2.66G
2660MHz
133MHz
533MHz
20x
Pentium 4 2.80G
2800MHz
133MHz
533MHz
21x
Pentium 4 2.80G
2800MHz
200MHz
800MHz
14x
Pentium 4 3.0G
3000MHz
200MHz
800MHz
15x
Pentium 4 3.06G
3060MHz
133MHz
533MHz
23x
Pentium 4 3.20G
3200MHz
200MHz
8000MHz
16x
Celeron 2.1G
2100MHz
100MHz
400MHz
21x
Celeron 2.2G
2200MHz
100MHz
400MHz
22x
Celeron 2.4G
2400MHz
100MHz
400MHz
24x
Note:
With CPU speed changing rapidly, there might be fastest CPU on the market by the time
you received this installation guide. This table is kindly for your references only.
5. Setting CPU Voltage & Frequency
CPU Core Voltage Auto Detectable
This motherboard supports CPU VID function. The CPU core voltage will be automatically
detected and it is not necessary to set CPU Core Voltage.
Setting CPU Frequency
This motherboard is CPU jumper-less design, you can set CPU frequency through the BIOS
setup, and no jumpers or switches are needed.
BIOS Setup > Frequency / Voltage Control > CPU Bus Frequency
Core Frequency = CPU FSB Clock * CPU Ratio
Warning:
Intel
®
865-P/PE
chipset supports maximum
800MHz (200MHz*4)
system bus and 66MHz
AGP clock; higher clock
setting may cause serious
system damage.
Note:
Intel 865-P/PE chipset only
support Northwood processors,
and don’t support Willamette
processors. Northwood processor
would detect the clock ratio
automatically, you may not be
able to adjust the clock ratio in
BIOS manually.
Note:
Some CPU fans do not have
sensor pin so they cannot support fan
monitoring.
CPUFAN1 Connector
4. Installing CPU & System Fan
SYSFAN2 Connector
SYSFAN3 Connector
GND
+12V
SENSOR
3. Installing Processor
Note:
If you do not match the CPU
socket Pin 1 and CPU cut edge well,
you may damage the CPU.
This socket supports Micro-FC-PGA2 package CPU, which is the latest CPU package
developed by Intel. Other forms of CPU package are impossible to be fitted in.
