101
A
A
X
X
4
4
P
P
E
E
M
M
a
a
x
x
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
***********************************************
Installing Drivers with Existing Windows NT 4.0
WARNING: If you wish to use your current bootable drive with the Windows NT4 operating system on the SATA150, perform the
troller. Do not attach any drives to your
S
When the "Install From Disk" appears, Insert the driver diskette into drive A:, then
ise SATA TX2plus (tm) IDE
elect SCSI Adapter Option" dialog box appears, press "Install."
has been installed.
Windows XP Installation Guide
***********************************************
steps below while the boot drive is still attached to your existing onboard IDE con
ATA150 until the steps below are complete.
1. Choose "Settings" from the "Start" menu.
2. Choose "Control Panel" from the "Settings" menu.
3. Double-click on the "SCSI Adapters" icon, which generates the "SCSI Adapters" dialog box.
4. Choose "Drivers," and then press "Add."
5. In the "Install Drivers" dialog box, press "Have Disk…"
6.
choose "OK."
. When the "Install Driver" dialog box appears, select "WinNT Prom
7
Controller" and then press "OK."
. When the "S
8
9. After a successful installation, the "SCSI Adapter Setup" box will show that the "WinNT
Promise SATA TX2plus (tm) IDE Controller" driver
1 . Power off your system, and then attach your hard drive(s) to the SATA
0
150 controller.
