112
A
A
X
X
4
4
5
5
F
F
-
-
8
8
X
X
M
M
a
a
x
x
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
8.
on, the "SCSI Adapter Setup" box will show that the "WinNT Promise SATA TX2plus (tm) IDE Controller"
driver has been installed.
WARNING:
ached to your existing onboard IDE controller. Do not attach any drives to your SATA150
.
which generates the "SCSI Adapters" dialog box.
hen choose "OK."
8.
dapter Option" dialog box appears, press "Install."
Promise SATA TX2plus (tm) IDE Controller"
0. Power off your system, and then attach your hard drive(s) to the SATA150 controller.
After a successful installati
******************************************************
Installing Drivers with Existing Windows NT 4.0
******************************************************
If you wish to use your current bootable drive with the Windows NT4 operating system on the SATA150, perform the steps
below while the boot drive is still att
until the steps below are complete
1. Choose "Settings" from the "Start" menu.
2. Choose "Control Panel" from the "Settings" menu.
3. Double-click on the "SCSI Adapters" icon,
4. Choose "Drivers," and then press "Add."
5. In the "Install Drivers" dialog box, press "Have Disk"
6. When the "Install from Disk" appears, insert the driver diskette into drive A, t
7. When the "Install Driver" dialog box appears, select "WinNT Promise SATA TX2plus (tm) IDE Controller" and then press "OK."
When the "Select SCSI A
9. After a successful installation, the "SCSI Adapter Setup" box will show that the "WinNT
driver has been installed.
1
