After you finish the setting of jumpers and connect correct cables. Power on
and enter the BIOS Setup, press <Del> during POST (Power On Self Test).
Choose "Load Setup Defaults" for recommended optimal performance.
15. Power-on and Load BIOS Setup
16. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name.
Del
Warning:
Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU, RAM,
HDD, etc.) are good enough for turbo
setting.
14. Die Hard BIOS
17. BIOS Upgrade under Windows Environment
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps,
and it’s STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1. Download the new version of BIOS package zip file from AOpen official web site. (ex:
http://english.aopen.com.tw
)
2. Unzip the download BIOS package (ex: W45F4DMAX102.ZIP) with WinZip
(
http://www.winzip.com
) in Windows environment.
3. Save the unzipped files into a folder, for example, W45F4DMAX102.EXE &
W45F4DMAX102.BIN.
4. Double click on the W45F4DMAX102.EXE; EzWinFlash will detect the model name
and BIOS version of your motherboard. If you had got the wrong BIOS, you will not
be allowed to proceed with the flash steps.
5. You may select preferred language in the main menu, then click [Start Flash] to start
the BIOS upgrade procedure.
6. EzWinFlash will complete all the process automatically, and a dialogue box will pop
up to ask you to restart Windows. You may click [YES] to reboot Windows.
7. Press <Del> at POST to enter BIOS setup, choose "Load Setup Defaults", then
“Save & Exit Setup”. Done!
It is strongly recommended NOT to turn off the power or run any application during
FLASH PROCESS.
Many viruses have been found that they may destroy bios code and data area lately. This
motherboard implements a very effective hardware protection method without any software
or BIOS coding involved, therefore it is 100% virus free. Once your BIOS were crashed, it is
easy to save it back. First step is to set JP24 to Pin2-3 to boot up the system with BIOS 2.
After that, please set the JP24 back to Pin1-2, go to AOpen website
(
http://download.aopen.com.tw/downloads
) to get your BIOS version suited for your
motherboard, and have it downloaded and flashed.
Pin1
Pin1
Boot from
BIOS1 (default)
Boot from
BIOS2
JP 24
1
1
1
Protect
BIOS2 (default)
Not protect
BIOS2
1
JP 25
