This motherboard provides six
USB
connectors to link USB devices, such as mouse, keyboard,
modem, printer, etc. There are two connectors on the back panel. You can use proper cable to
connect other USB connectors to the back panel or front panel of chassis.
TPA+
GND
TPB+
+12V(Fused)
USB2.0 Connector
12. JP28 Speaker Jumper
10. IEEE 1394 Connectors
This motherboard has three IEEE 1394 connectors onboard. The IEEE 1394 provides data
transfer rate up to 400Mb/s, and USB just has 12Mb/s. Therefore the IEEE 1394 interface
can connect with the devices that need high data transferring performance, such as digital
camera, scanner or others IEEE 1394 devices. Please use the proper cable to connect
with devices.
This motherboard provides USB keyboard / mouse wake-up function. You can use JP28 to
enable or disable this function, which could resume your system from suspend mode with
keyboard or mouse. The factory default setting is set to “Enable”(1-2), and you may disable this
function by setting the jumper to 2-3.
The IrDA connector can be configured to support wireless infrared module, with this module
and application software such as Laplink or Windows 95 Direct Cable Connection, the user
can transfer files to or from laptops, notebooks, PDA devices and printers. This connector
supports HPSIR (115.2Kbps, 2 meters) and ASK-IR (56Kbps).
Install the infrared module onto the
IrDA
connector and enable the infrared function from
BIOS Setup, UART Mode, make sure to have the correct orientation when you plug in the
IrDA connector.
13. Support Six USB Connectors
11. IrDA Connector
Pin 1
Pin 1
Pin 1
TPA-
GND
TPB-
+12V(Fused)
SHIED GND
1 2
9 10
Pin 1
Pin1
+5V
SBD3-
SBD3+
GND
NC
+5V
SBD2-
SBD2+
GND
KEY
1
Pin1
Disable
Enable
(Default)
1
1
Pin 1
1
KEY
GND
IR_RX
NC
+5V
IR_TX
IrDA Connector
